Rackmount Powercom 3000VA Uninterruptible Power Supply Battery Backup

SPECIFICATION

AC INPUT

• AC Input Capacity on Battery 3000VA
• AC Input Voltage (+/-) 25% at line input
• AC Input Frequency 50 or 60 Hz +/- 10% (auto sensing)

AC OUTPUT

• AC Output Voltage Simulated sine wave at 100V or 110V/115V/120V or 220V/230V/240V +/- 5%
• AC Output Frequency 50 or 60 Hz +/- 1Hz
• AC Output Voltage Regulation AVR automatically increase output voltage 15% above input voltage if -9% to -25% of nominal. AVR decrease output voltage 13% below input voltage if +9% to +25% of nominal
• AC Output Transfer 2/4 milliseconds, including detection time

PROTECTION

• Protection Spike 320 Joules,
• Protection EMI/RFI 10dB at 0.15 MHz, 50 dB at 30 MHz
• Protection Overload UPS automatic power off if overload exceeds 110% of nominal at 60 seconds and 130% at 3 seconds
• Protection Short Protection UPS output cut off immediately or input fuse protection
• Protection Unit Fuse for overload & short circuit protection
• Protection 10 BaseT Network (UTP, RJ-45) compatible jacks

BATTERY

• Battery Type - Sealed, Maintenance-free lead acid batteries
• Battery TypicaL 8 hours (to 90% of full capacity)
• Battery Protection Automatic self-test & discharge protection, replace battery indicator
• Battery Run Time 95-105 minutes

PHYSICAL

• Physical Weight kgs 33
• Physical Weight 71
• Physical Dimension mm 483x485.5x130 (3U)

INDICATOR

LED LED

ALARM

• Alarm Battery Backup Slow beeping sound (about 0.2 Hz)
• Alarm Battery Low Rapid beeping sound (about 1Hz)
• Alarm Overload Continue beeping sound

INTERFACE

• Interface RS-232 Bi-directional communication port

ENVIRONMENT

• Environment Ambient 3,500 meters max. elevation, 0-95% humidity non-condensing, 0-40 deg c
• Environment Audible Less 40dBA (1 meter from surface)

Manufacturer Warranty: 2 years